CFD Online Logo CFD Online URL
Home > Forums > CFX

Mesh problems for keel

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   June 17, 2008, 18:00
Default Mesh problems for keel
Posts: n/a
Im having troubles with getting a good mesh for the leading and trailing edge of a keel. Im using the Tetra mesh with 3 prism layers and decreased the tetra height as far as I can go with current computer. Any ideas? Here's link to a pic of the problem:

  Reply With Quote

Old   June 18, 2008, 10:53
Default Re: Mesh problems for keel
Posts: n/a
The trailing edge seems to be quite sharp. There are two issues here. 1 - You'll probably want to use 'thin cuts' to keep the two sides of the keel separated and avoid the 'jagged' trailing edge mesh. Then you can use a larger mesh size and keep the two sides separate. (See the help system or contact your support rep for details on using thin cuts.) 2 - The prisms might be messy due to the two normals at the trailing edge being almost 180-deg apart.
  Reply With Quote

Old   June 22, 2008, 19:08
Default Re: Mesh problems for keel
Glenn Horrocks
Posts: n/a

I would make the geometry two blocks split along the symmetry plane. In my experience thin cuts is variable, sometimes works, sometimes doesn't.

Glenn Horrocks
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Gambit problems Althea FLUENT 22 January 4, 2017 04:19
SnappyHexMesh for internal Flow vishwa OpenFOAM Native Meshers: snappyHexMesh and Others 24 June 27, 2016 08:54
Mesh motion with Translation & Rotation Doginal CFX 2 January 12, 2014 07:21
Mesh refinement causing problems ChrisDanger ANSYS Meshing & Geometry 3 October 6, 2010 17:35
problems import mesh from icem11!!! Julieta CFX 4 March 23, 2008 10:17

All times are GMT -4. The time now is 08:35.