 |
 |
 |
|
|
|
[Sponsors] | ||||
August 14, 2008, 07:45
|
BL from surface mesh on ICEM
|
#1 |
|
Guest
Posts: n/a
|
Hi Everybody,
I'm trying to build a prism mesh on ICEM. I have first imported a surface mesh in Fluent format (msh). I have only the mesh and not the geometry, so the only option available for the prism mesh generation is the "Extrude Mesh". I built the prism volume mesh, but the side of the BL overlaps the other surfaces. I am not able to trim the shared parts from the surrounding surfaces in order to build the tetra mesh on the hollow space. Could anybody help me? Many thanks Davide |
|
|
||
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| [Gmsh] 2D Mesh Generation Tutorial for GMSH | aeroslacker | OpenFOAM Meshing & Mesh Conversion | 12 | January 19, 2012 04:52 |
| [snappyHexMesh] non-smooth mesh | Svensson | OpenFOAM Meshing & Mesh Conversion | 11 | January 18, 2012 10:13 |
| [ICEM] Automatic mesh generation script surface intersection problem | stuart23 | ANSYS Meshing & Geometry | 0 | May 13, 2011 02:10 |
| [snappyHexMesh] external flow with snappyHexMesh | chelvistero | OpenFOAM Meshing & Mesh Conversion | 11 | January 15, 2010 20:43 |
| varying curve mesh spacing at icem surface-mesh? | mirko_r | ANSYS Meshing & Geometry | 6 | January 14, 2010 14:23 |
Linear Mode
