|
[Sponsors] |
October 14, 2008, 05:19 |
ICEM CFD 11tetra mesh
|
#1 |
Guest
Posts: n/a
|
I have particular airfoil and I need to calculate air flow. I made very thin 3D sector (extruded airfoil on 20 cm) and built domain boundaries around this sector. So now I have very thin 3D box (about 11000 cm length and width and 20 cm thickness) What I want is to generate tetra mesh but I face a lot of problems. I guess this is because of very thin 3D box. Maximum size of tetrahedral element must be much more than 20 cm (about 500 cm) and mesher can't insert such tetrahedral element correctly. On the other hand minimum size must be about 1 cm near airfoil to catch all differencies in flow. Please advice me how to build mesh in my situation?
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Import Mesh from ICEM CFD to CFX | Andre Almeida | CFX | 16 | April 19, 2016 03:42 |
Moving mesh | Niklas Wikstrom (Wikstrom) | OpenFOAM Running, Solving & CFD | 122 | June 15, 2014 06:20 |
ICEM CFD 5.0 - 2D to 3D Mesh Extrude | James Date | CFX | 7 | October 22, 2013 03:46 |
Loading previously saved mesh in ICEM CFD | user0314 | ANSYS Meshing & Geometry | 1 | September 20, 2011 12:46 |
[ICEM] Problem with volume mesh in ICEM CFD | kolapoasafa | ANSYS Meshing & Geometry | 2 | September 16, 2011 03:54 |