|
[Sponsors] |
November 25, 2008, 09:44 |
how to export "wall heat flux" to tecplot?
|
#1 |
Guest
Posts: n/a
|
hi, all. this problem made me terrible! the codes i used is CFX 11.0,and I want export "wall heat flux" to tecplot.if i export a CGNS file, this file can be import in tecplot, but i find the variable is not complete, the variable:" wall heat flux"," heat flux", and so on, is not include in it. if i export the "wall heat flux" in the CFX-Post, it can't be import in tecplot,
Is anybody could help me? thanks a lot! |
|
November 26, 2008, 08:51 |
Re: how to export "wall heat flux" to tecplot?
|
#2 |
Guest
Posts: n/a
|
Hi,
I think you need to enable: Results Options> Include Variables Only Found On Boundaries when you perform the export. It then appears as the variable 'Bulk Energy Flow Rate' in the CGNS file. Regards, Johnson |
|
November 26, 2008, 10:03 |
Re: how to export "wall heat flux" to tecplot?
|
#3 |
Guest
Posts: n/a
|
... actually if you also set the output Level to '3' on the export form, you will get the variables 'Heat Flux' (equivalent to the bulk energy flow) and 'Wall Heat Flux' along with several others.
Regards, Johnson |
|
November 27, 2008, 10:45 |
Re: how to export "wall heat flux" to tecplot?
|
#4 |
Guest
Posts: n/a
|
hi,Johnson,
you are right! the problem is solved, thank you very much! you help me a lot! |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Sign of Heat Flux at wall | Kyung | FLUENT | 2 | February 26, 2016 17:25 |
Looking for a code of exact wall heat flux on cylinder enclosure wall | ljwbuaa | Main CFD Forum | 5 | January 16, 2011 09:33 |
calculation of wall heat flux in CHT | richard | CFX | 1 | July 23, 2009 10:00 |
Heat flux and k-e wall boundary conditions | Blob | CFX | 4 | June 8, 2009 06:10 |
wall heat flux | Asghari | FLUENT | 2 | August 24, 2006 12:58 |