|
[Sponsors] |
Concentric Cylinders in Eulerian Model of Comsol |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
March 5, 2019, 09:52 |
Concentric Cylinders in Eulerian Model of Comsol
|
#1 |
New Member
navid
Join Date: Oct 2018
Posts: 3
Rep Power: 7 |
Hi all
The simulation is about cutting transport and uses Eulerian model in Comsol. There is two concentric cylinders. The inner one rotates and the outer one is fixed. The fluid flows between these cylinders. It is possible to be simulated by "rotating shaft" in its mixture model. But due to density differences of fluid-solid, Euler model must be used. BUT There is no "rotating shaft" or "moving wall" ,as in other models, in Euler model to make a wall rotate. So can anyone who is familiar with Comsol help me on this subject please??? Thank you |
|
Tags |
comsol 5.3a, concentric cylinders, euler euler solid-gas, moving wall, rotating wall |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
How to simulate the eulerian multiphase model about particle | jhlee9622 | STAR-CCM+ | 2 | November 24, 2016 11:37 |
wall adhesion in eulerian model | emibah | FLUENT | 1 | November 8, 2016 07:15 |
questions about eulerian model coupled with population balance model | yannan | FLUENT | 0 | July 21, 2016 07:19 |
some questions about Eulerian model coupled with population balance model | yannan | FLUENT | 0 | July 20, 2016 13:47 |
Overflow Error in Multiphase Modelling with Two Continuous Fluids | ashtonJ | CFX | 6 | August 11, 2014 14:32 |