Importing ANSYS ICEM CFD to COMSOL

DJARA · March 18, 2021, 06:39

Dear All,

I would like to know if there is a way to import a mesh created in Ansys Icem CFD to COMSOL.

Thank you

aero_head · March 18, 2021, 09:50

Quote:

Originally Posted by DJARA

Dear All,

I would like to know if there is a way to import a mesh created in Ansys Icem CFD to COMSOL.

Thank you

Hello,

These links below provide videos regarding importing the mesh.

https://www.comsol.com/video/create-...-imported-mesh
https://www.comsol.com/video/importi...l-multiphysics

northstrider · September 20, 2024, 18:57

Quote:

Originally Posted by DJARA

Dear All,

I would like to know if there is a way to import a mesh created in Ansys Icem CFD to COMSOL.

Thank you

Hi Djara,

Were you ever successful in importing a mesh generated in Ansys to COMSOL?

DJARA · September 20, 2024, 19:36

Hi northstrider,

I know a guy who did it using Openfoam as an intermediate software to change the formats.
I used a python library, I think is called gmeshio, and paraview as in-between software, but I do not remember all the details.
Good luck probably there are different ways to do it.

Best wishes

March 18, 2021, 06:39	Importing ANSYS ICEM CFD to COMSOL	#1
DJARA New Member Daniel Jara Heredia Join Date: Jul 2020 Posts: 11 Rep Power: 7	Dear All, I would like to know if there is a way to import a mesh created in Ansys Icem CFD to COMSOL. Thank you

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Problem in importing Structured mesh from ICEM CFD to ANSYS FLUENT	Aravind M	FLUENT	0	August 31, 2020 08:22
Problem Importing Geometry For Mesh in ICEM CFD	losiola	ANSYS	1	May 5, 2020 17:10
Can you help me with a problem in ansys static structural solver?	sourabh.porwal	Structural Mechanics	0	March 27, 2016 18:07
importing mesh file from ICEM CFD to Ansys Multiphysics	kedar188200	ANSYS	0	April 26, 2012 12:33
Opening ICEM CFD directly from ANSYS	matheusguzella	ANSYS Meshing & Geometry	6	February 22, 2010 12:27

September 20, 2024, 19:36		#4
DJARA New Member Daniel Jara Heredia Join Date: Jul 2020 Posts: 11 Rep Power: 7	Hi northstrider, I know a guy who did it using Openfoam as an intermediate software to change the formats. I used a python library, I think is called gmeshio, and paraview as in-between software, but I do not remember all the details. Good luck probably there are different ways to do it. Best wishes