CONVERGE

Read this first: How to ask a question on the forums

Page 20 of 24

Threads in Forum : CONVERGE

Rating Thread / Thread Starter	Last Post	Replies	Views
warning and converge has stoped jiliyur	August 3, 2017 13:18 by MFGT	9	1,210
converge has stop working jiliyur	August 3, 2017 13:11 by MFGT	6	1,110
deffirent of simulation on cvg file and surface .dat jiliyur	August 3, 2017 12:59 by MFGT	1	1,216
issim.in Georges Thomas	August 2, 2017 10:47 by Georges Thomas	2	898
error geometry jiliyur	July 31, 2017 14:22 by jiliyur	4	894
Unequal mass flow injector wushan54	July 31, 2017 12:14 by ymao	4	905
How to apply AMR settings kahjoonyong	July 28, 2017 04:18 by MFGT	11	2,774
Need therm.dat gas.dat mech.dat files sanket31594	July 28, 2017 04:13 by MFGT	14	3,134
error:upper_energy_value must be greater than lower_energy_value luckyboy	July 25, 2017 10:26 by luckyboy	5	1,357
initial condition luckyboy	July 24, 2017 05:14 by luckyboy	4	971
Warning_extrapolating on the temperature calculation during combustion process wushan54	July 23, 2017 22:33 by wushan54	3	1,318
Total injected mass in 60 degree sector sanket31594	July 21, 2017 04:26 by MFGT	6	1,029
Rate-shape values hamedc	July 20, 2017 10:51 by SamWijey	4	1,469
NOx value in output files whysoserious	July 12, 2017 10:26 by SamWijey	3	1,436
extrapolating on the temperature calculation rsoni451	July 7, 2017 09:46 by rsoni451	4	1,721
converge compression ratio liuadam67	July 5, 2017 11:09 by liuadam67	7	1,767
Parcels specific distibution TWIN	July 5, 2017 08:08 by TWIN	3	1,092
error during trqansfering post files in Ensight. hiren tala	July 5, 2017 02:28 by MFGT	3	961
Error and Warnings when running simulation omid_aa	July 4, 2017 14:06 by omid_aa	2	1,048
Warnings and error rsoni451	June 29, 2017 13:15 by rsoni451	2	1,638
Can converge do PEMFC flow simulation? Markthu	June 26, 2017 17:22 by jlemoine	1	975
piston motion file format issue kri321shna	June 16, 2017 10:18 by jlemoine	1	861
Sealing Error kri321shna	June 16, 2017 10:12 by jlemoine	6	1,230
Converge warning rsoni451	June 16, 2017 08:42 by Blanco	1	1,130
How to increase simulation crank angle with SI8 engine SAGE? 605021105	June 12, 2017 02:41 by MFGT	3	1,239
can not began luckyboy	June 9, 2017 21:43 by luckyboy	2	798
what does this means !!! medaouarwalid	June 9, 2017 11:27 by SamWijey	1	997
How set wall values joescor2	June 6, 2017 12:21 by SamWijey	1	1,069
questions on wall film simulation 2 learner1111	June 5, 2017 13:00 by SamWijey	1	1,172
CHT simulation running joescor2	June 5, 2017 10:44 by SamWijey	5	1,281
Geometry rendering PRJHA	June 5, 2017 10:41 by SamWijey	1	1,091
Diesel chemistry PRJHA	June 5, 2017 10:39 by SamWijey	3	1,193
Laminar and Turbulent flame speed calculation using SAGE topperz	June 2, 2017 17:57 by chaighodke	1	1,224
error in Simulation hiren tala	June 1, 2017 03:15 by hiren tala	2	1,418
Resolution housingrico	May 31, 2017 16:39 by chaighodke	2	1,014
Converge Error,, Doo Hee Yoon	May 28, 2017 11:13 by MFGT	3	1,989
CVG question modism	May 26, 2017 20:50 by modism	2	1,014
VOF model coefficients melodia	May 25, 2017 11:47 by chaighodke	1	1,075
post_convert command LINUX rsoni451	May 25, 2017 11:15 by chaighodke	1	1,192
Wall boundary conditions for the automatic wall treatment function for K-omega models TCosta	May 25, 2017 10:29 by chaighodke	3	1,189

Read this first: How to ask a question on the forums

Page 20 of 24

« First

Last »

	New posts		Hot thread with new posts
	No new posts		Hot thread with no new posts
	Thread is closed

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

All times are GMT -4. The time now is 18:27.