ansys cfd mhd license

m.najminoori · July 24, 2018, 16:31

Hi everyone,
I want use electromagnetic model in CFX but when I active this model in cfx-pre, the error is :

" In Analysis 'Flow Analysis 1' - Domain 'Default Domain': Simulations using the Electromagnetic Model require an ANSYS CFD MHD license. A case using the Electromagnetic Model can be set up in CFX-Pre, but will only be able to run in the solver with the required license available. Please contact your ANSYS representative for further details."

How can I use ANSYS CFD MHD license??

Thanks.
Mahjabin

LuckyTran · August 17, 2018, 16:03

You need a license. Do you have a license? The MHD license should be in the same license file as the CFD licenses and you normally would not need to do anything.

July 24, 2018, 16:31	ansys cfd mhd license	#1
m.najminoori New Member Mahjabin najminoori Join Date: Jul 2018 Location: kerman Posts: 3 Rep Power: 6	Hi everyone, I want use electromagnetic model in CFX but when I active this model in cfx-pre, the error is : " In Analysis 'Flow Analysis 1' - Domain 'Default Domain': Simulations using the Electromagnetic Model require an ANSYS CFD MHD license. A case using the Electromagnetic Model can be set up in CFX-Pre, but will only be able to run in the solver with the required license available. Please contact your ANSYS representative for further details." How can I use ANSYS CFD MHD license?? Thanks. Mahjabin

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ANSYS Workbench on "Uncertified" Linux Distros	hsr	CFX	288	September 19, 2022 12:59
ERROR #001100279 has occurred in subroutine ErrAction.	wangy1767	CFX	36	July 25, 2020 07:09
[ANSYS Meshing] The shared license is currently not available for this application	preetam69	ANSYS Meshing & Geometry	5	April 26, 2016 09:36
ansys 12.1 license error	clarkent	ANSYS	5	November 1, 2010 09:48
ANSYS license message	Santhosh	CFX	5	November 23, 2005 06:54

August 17, 2018, 16:03		#2
LuckyTran Senior Member Lucky Join Date: Apr 2011 Location: Orlando, FL USA Posts: 5,114 Rep Power: 60	You need a license. Do you have a license? The MHD license should be in the same license file as the CFD licenses and you normally would not need to do anything.