 |
 |
 |
|
|
|
[Sponsors] | ||||
Integrating Floefd model into Amesim with FMU |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
October 2, 2023, 03:18
|
Integrating Floefd model into Amesim with FMU
|
#1 |
|
New Member
Nezahat Sivaslı
Join Date: May 2020
Posts: 3
Rep Power: 5  |
We are using version 2306 of NX FloEFD. We are transferring EMU data from FloEFD to AmeSIM. As part of the FMU Import Assistant we have problems in the 'Submodel generation section. The outputs are showing but all of the inputs are not coming.
The error: Model Description not OK. There are some error(s) Forbidden initial attribute "approx" in scaler variable to_floefd_1 When I used FMU checker, FMU model is working. Amesim's import part is okay but FloEFD is not excepting FMU model. |
|
|
|
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Fixed Temperature Constraint problems for coal combustion | yglovella | OpenFOAM | 0 | February 16, 2023 01:00 |
| interFoam wave propagation and explosion of Courant number and residuals | ChiaraViola | OpenFOAM Running, Solving & CFD | 1 | June 26, 2019 05:36 |
| manualInjection model in sprayFoam | Mentalo | OpenFOAM Running, Solving & CFD | 1 | April 2, 2014 09:29 |
| how to use contact resistance model in floEFD | eggliang | FloEFD, FloWorks & FloTHERM | 4 | August 5, 2011 00:36 |
| Problems bout CFD model of biomass gasification, Downdraft gasifier | wanglong | FLUENT | 2 | November 25, 2009 23:27 |
Linear Mode
