 |
 |
 |
|
|
|
[Sponsors] | ||||
March 27, 2015, 04:40
|
viscoelastic polymer displacement oil
|
#1 |
|
New Member
heidi
Join Date: Mar 2015
Posts: 6
Rep Power: 10  |
hello everyone,my case is viscoelastic polymer displacement oil in T junction,the polyflow 14.0 is used,the method is remeshing ,but the solution is not converged ,who can help me? thank you.
|
|
|
|
|
|
March 28, 2015, 02:18
|
the model
|
#2 |
|
New Member
heidi
Join Date: Mar 2015
Posts: 6
Rep Power: 10 |
my model is T junction, the oil is filling in the model, the polymer is inject in the inlet, and the polymer consider the viscoelasticy, which method I can use to simulate the interface between the polymer and oil, plz help me, than you!
|
|
|
|
|
|
 |
| Tags |
| remeshing, two phase, viscoelastic |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| snappyhexmesh remove blockmesh geometry | philipp1 | OpenFOAM Running, Solving & CFD | 2 | December 12, 2014 10:58 |
| [snappyHexMesh] determining displacement for added points | CFDnewbie147 | OpenFOAM Meshing & Mesh Conversion | 1 | October 22, 2013 09:53 |
| Expression with time function | kestasposkus | CFX | 28 | July 24, 2011 06:47 |
| FSI - Specified Mesh Displacement | Vinzent | CFX | 2 | September 17, 2010 07:09 |
| how to use Total Mesh Displacement for making a subject translating and rotating? | snailstb | CFX | 3 | September 16, 2009 04:06 |
Linear Mode
