|
[Sponsors] |
Problem with Global Courant Number in Multiphase Euler-VOF |
![]() |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
![]() |
![]() |
#1 |
New Member
Join Date: Jul 2016
Posts: 4
Rep Power: 10 ![]() |
Hey all!
I'm having problems solving a case where the simulation suddenly stops because the global courant has an absurd increase in number. I'm running a Multi-species, multi phase problem with species transport active, using the Euler model with Multi-Fluid VOF active. The issue is, after some time steps, even with converge in residuals, the global Courant jumps from around 2.5 to about 18000, from one time-step to another. Do you have any idea what might be the problem? |
|
![]() |
![]() |
![]() |
Tags |
euler, multiphase, multispecies, vof |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
[snappyHexMesh] snappyHexMesh sticking point | natty_king | OpenFOAM Meshing & Mesh Conversion | 11 | February 20, 2024 10:12 |
problem with InterFOAM interface courant number | Yage | OpenFOAM | 6 | June 10, 2020 11:45 |
decomposePar -allRegions | stru | OpenFOAM Pre-Processing | 2 | August 25, 2015 04:58 |
Upgraded from Karmic Koala 9.10 to Lucid Lynx10.04.3 | bookie56 | OpenFOAM Installation | 8 | August 13, 2011 05:03 |
Unaligned accesses on IA64 | andre | OpenFOAM | 5 | June 23, 2008 11:37 |