[ali_bizhanpour]

Hi every one, hope you be healthy
I am simulating a moving guide vane in the water pipe with FLUENT, the guide vane only can rotates in one direction, the guide vane rotates by torque that water stream imposes, I use SIX-DOF to simulate it but when I want to see the motion with display zoon motion, the guide vane does not move and FLUENT gives this warning:
Warning: unable to read motion history file D:/Master/Final Project/ansys/AZAR/17dynamic mesh/fluent_guide.6dof.
Pictures are attached.
Best regard.

[AlexanderZ]

1. check if this file exists in folder
2. may be the problem in the folder name, which contains space symbol inside

17dynamic mesh

you may try to use _ instead of space symbol
TO BE: 17dynamic_mesh

[ali_bizhanpour]

Originally Posted by AlexanderZ

1. check if this file exists in folder
2. may be the problem in the folder name, which contains space symbol inside

17dynamic mesh

you may try to use _ instead of space symbol
TO BE: 17dynamic_mesh

Thanks for your reply, there is no file with this name in this folder.
Are you know what the problem is and how I can create it?

[pakk]

Originally Posted by ali_bizhanpour

Thanks for your reply, there is no file with this name in this folder.
Are you know what the problem is and how I can create it?

Alexander already identified a problem. You have a space in your folder name (two even). Fix that problem first, see if it helps.