CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Granular Temperature based Model

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 22, 2012, 13:54
Default Granular Temperature based Model
  #1
Member
 
Join Date: Apr 2012
Posts: 48
Rep Power: 14
vagaikwa is on a distinguished road
Hello,
I am trying to simulate blood with two phases as plasma(water) and rbc..im using eulerian-eulerian multiphase model with rc as dispersed phase using the granular temperature thing..i hv specified restitution coefficient, specularity constant and johnson and jackson wall condition using FLUENT 6.3..But none of my residual graphs are converging..I tried to vary my mesh size as well..ut still then they are running parallel to the x axis..do i still need to specify slip velocity somewhere? or using some udf at the wll for slip velocity? or johnson and jackson condition itself is sufficient and would take care of that? please suggest. thank you.
vagaikwa is offline   Reply With Quote

Reply

Tags
granular temperature, slip velocity

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Eularian granular two phase model Kelly FLUENT 19 December 12, 2017 01:33
Calculation of the Governing Equations Mihail CFX 7 September 7, 2014 07:27
Model for a profile temperature inside a digester enzome STAR-CCM+ 4 November 11, 2011 15:44
the maximum value of granular temperature haijj FLUENT 0 August 25, 2008 06:02
Granular Temperature mansih rane FLUENT 1 January 28, 2008 02:39


All times are GMT -4. The time now is 22:34.