|
[Sponsors] |
July 4, 2012, 02:57 |
Modelling Drug eluting stents
|
#1 |
Member
Dr. Moloy Kumar Banerjee
Join Date: Jun 2011
Posts: 71
Rep Power: 14 |
Atherosclerosis is the most common arterial disease and is responsible for heart attacks and strokes. The insertion of a stent to the affected area can increase the lumen and act as a scaffold to hold the walls apart. The stent itself is essentially a small metal mesh tube and is inserted into the affected area on a balloon catheter, which is expanded and then removed, leaving the stent in place. However, this can provoke an inflammatory response which can lead to restenosis—the thickening over of the vessel wall. Drug-eluting stents are stents that are coated with a drug, often embedded in a polymer. The drug is released slowly, interrupting the smooth muscle cell cycle and thus their proliferation. This, in turn, can significantly reduce restenosis.
Now, my problem is that how to formulate the same in Fluent. Anybody working on this field please share the experience. |
|
July 5, 2012, 19:10 |
|
#2 |
Member
Casey
Join Date: Jun 2009
Posts: 98
Rep Power: 16 |
I would model the artery(ies) in gambit and create a zone in the region you would like to model the stent.
In fluent use eulerian modeling and make the stent zone a packed bed. Use a UDF to define the pressure drop through the stent over time (using Darcy's law or something). You will need to make assumptions on the amount of drug that dissolves from the stent, which will affect the pressure drop. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
error message | cuteapathy | CFX | 14 | March 20, 2012 06:45 |
Advice on multi-phase flow modelling | Martin | Main CFD Forum | 3 | October 14, 2008 05:16 |
Unsteady modelling technique? | Carlos | FLUENT | 0 | September 26, 2008 11:37 |
how to ensure that your modelling is correct | rvndr | Main CFD Forum | 7 | March 1, 2004 12:21 |
Computational Modelling of Vortex Separators | May Lim | Main CFD Forum | 6 | November 13, 1998 12:36 |