|
[Sponsors] |
January 16, 2013, 08:38 |
Convergence problem
|
#1 |
New Member
Join Date: Dec 2011
Posts: 29
Rep Power: 14 |
Hi,
I am simulating a fluidized bed reactor using Eulerian multiphase model, I set two phases in my simulation: solid and liquid. I did patch the initial volume fraction before running. I am using laminar flow in transient simulation. For the boundary condition i set inlet as velocity inlet and outlet as pressure outlet with gauge pressure = 0pa. When i try to calculate, the solution is unable to converge. I tried reducing the under-relaxation factors to 0.2 ,reduce the time step and solve using the first order solution method but it still diverge. Are there other ways to make it converge? Thanks! |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
convergence problem when use pisoFoam, LES for wind tunnel case | Forrest_Lei | OpenFOAM | 3 | July 19, 2011 06:00 |
convergence problem | commonyue | Main CFD Forum | 1 | December 1, 2009 03:54 |
Convergence of CFX field in FSI analysis | nasdak | CFX | 2 | June 29, 2009 01:17 |
3D Fluid Flow Convergence problem | Emily | FLUENT | 2 | March 21, 2007 22:18 |
Non Convergence of 3D Heat transfer cfd problem | Balraj | Main CFD Forum | 3 | December 9, 2004 00:24 |