PLZ HELP: Case and Data

laura_c · April 20, 2013, 18:19

Hi guys, I am modelling in FLUENT and I need to save my work.... I usually do: File - Write - Case and Data but this time, the option case and data is not showing up, only the following options are there:

- autosave
- start journal
- start transcript

Can anyone help me plz? tnx

Far · April 21, 2013, 03:44

Are you working in workbench?

laura_c · April 21, 2013, 04:51

Yes fluent in the set up

scipy · April 22, 2013, 05:41

When working in Fluent under Workbench I think the options to write case/data are under File -> Export or something similar.

laura_c · April 22, 2013, 06:39

ok...that I have..... let me ask a stupid question.... if I save in the file - export - fashion, then when I open the file, it should load the iterations automatically?

and I shall save after completing the iterations right?

April 20, 2013, 18:19	PLZ HELP: Case and Data	#1
laura_c New Member Laura Join Date: Apr 2013 Posts: 15 Rep Power: 14	Hi guys, I am modelling in FLUENT and I need to save my work.... I usually do: File - Write - Case and Data but this time, the option case and data is not showing up, only the following options are there: - autosave - start journal - start transcript Can anyone help me plz? tnx

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How to repeat to read the same case without saving case and data file?	lcg44	Fluent UDF and Scheme Programming	4	November 22, 2012 11:45
Writing Case and Data Files Using Journal/Scheme Files	svp	Fluent UDF and Scheme Programming	0	April 5, 2011 12:04
fluent case n data files not exporting to tecplot	krishna	FLUENT	2	February 18, 2007 00:24
how to save case data and data during iteration?	JOHN	FLUENT	3	October 10, 2006 20:40
How to update polyPatchbs localPoints	liu	OpenFOAM Running, Solving & CFD	6	December 30, 2005 18:27

April 21, 2013, 03:44		#2
Far Senior Member Sijal Join Date: Mar 2009 Location: Islamabad Posts: 4,565 Blog Entries: 6 Rep Power: 55	Are you working in workbench?

April 21, 2013, 04:51		#3
laura_c New Member Laura Join Date: Apr 2013 Posts: 15 Rep Power: 14	Yes fluent in the set up

April 22, 2013, 05:41		#4
scipy Senior Member Alex Pasic Join Date: Aug 2011 Location: Croatia Posts: 199 Rep Power: 17	When working in Fluent under Workbench I think the options to write case/data are under File -> Export or something similar.

April 22, 2013, 06:39		#5
laura_c New Member Laura Join Date: Apr 2013 Posts: 15 Rep Power: 14	ok...that I have..... let me ask a stupid question.... if I save in the file - export - fashion, then when I open the file, it should load the iterations automatically? and I shall save after completing the iterations right?