CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Cell Zones Recognition Problem

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 19, 2013, 14:00
Default Cell Zones Recognition Problem
  #1
Member
 
Arthur Loginow
Join Date: Aug 2012
Posts: 99
Rep Power: 12
Maralady is on a distinguished road
Hello, I made a 3 cell zones geometry, at the DM the program recognizes 3 different parts and 3 different bodies (which is good) at the Mesh module I am able to define the BC (as named sections) including the interfaces with no problem at all, my problem starts when I open fluent, it does not recognize the 3 different cell zones, instead it just recognize 1 cell zone, what I am doing wrong? Please a little help will be appreciated. Oh just providing more information I crated the geometry with 3 different sketches, then I made the surfaces from sketches an used Add Frozen instead of Add Material.

Thanks.
Maralady is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Multiple cell zones in FLUENT bluemonkee FLUENT 14 May 23, 2017 00:02
Extract cells from multiple cell zones ggoggodak85 OpenFOAM Programming & Development 3 May 4, 2012 06:39
Cells with t below lower limit Purushothama Siemens 2 May 31, 2010 21:58
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues michele OpenFOAM Meshing & Mesh Conversion 2 July 15, 2005 04:15
Problem in TE model and cell size Mir Siemens 2 December 11, 2001 09:46


All times are GMT -4. The time now is 10:46.