|June 21, 2009, 10:02||
Wrong Pressure countors for channel flow driven by mass flow rate or press gradient
Join Date: Jun 2009
Posts: 9Rep Power: 9
Hi every one,
i am new to this forum. i have just started using fluent. i am getting some problem in turbulent channel flow simulation by RANS in fluent 6.2. i have tried channel flow by constant mass flow rate and constant press grad via various models like std k-e, RNG k-e, rk-e and k-w but in all these simulation i am not getting the pressure values right. Actually it should be a gradual decrease in the pressure from inlet to outlet but i am not getting that. Velcity profile is ok.
What i assume that i am not getting a turbulent flow during simulation...
If anybody can provide me some help on that.
|Thread||Thread Starter||Forum||Replies||Last Post|
|Pressure Driven Supersonic Flow in Converging-Diverging Nozzle||cdm||OpenFOAM Running, Solving & CFD||4||July 21, 2013 16:24|
|Water subcooled boiling||Attesz||CFX||7||January 5, 2013 04:32|
|How to change from mass flow to volume flow rate||stanley||FLUENT||1||February 2, 2007 07:44|
|pressure gradient term in low speed flow||Atit Koonsrisuk||Main CFD Forum||2||January 10, 2002 11:52|
|Hydrostatic pressure in 2-phase flow modeling (long)||DS & HB||Main CFD Forum||0||January 8, 2000 16:00|