|
[Sponsors] |
July 7, 2013, 23:51 |
Dynamic mesh problem
|
#1 |
New Member
Rohit Jain
Join Date: Feb 2013
Posts: 13
Rep Power: 13 |
*URGENT*
Hi guys I am trying to generate 2D waves in fluent using an oscillating wall. But after 15 odd iterations, it gives an error of negative volume. I have attached the pictures of mesh before and after the calculation. Can anybody please tell me if there is anything wrong with my mesh or there is some problem in the setup. Thank you |
|
July 8, 2013, 00:25 |
|
#2 |
New Member
Rohit Jain
Join Date: Feb 2013
Posts: 13
Rep Power: 13 |
And currently I have created only one dynamic zone i.e. the moving wall. I am using the only the layering option.
|
|
September 7, 2013, 13:14 |
negative volume
|
#3 |
New Member
poya
Join Date: Jun 2013
Posts: 7
Rep Power: 12 |
about this problem i study in fluent lecture that must be to have a skewness less than 0.7 or acceptable(less than 0.9-0.95, i dont know more).
but in my project resolve this notice and problem yet appear(Although in more time step) and in preview mesh motion the quality orthogonal after several time step is less than 0.05. and then error ...... what setting in remeshing and smothing is required to resolve this problem ? |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
dynamic mesh for multi-region problem | alundilong | OpenFOAM Programming & Development | 6 | June 5, 2023 19:13 |
Update of the variables after dynamic mesh motion. | gtg258f | OpenFOAM Programming & Development | 9 | January 18, 2014 10:08 |
Dynamic mesh update problem. | David | FLUENT | 3 | March 15, 2012 05:02 |
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere! | sc298 | OpenFOAM Meshing & Mesh Conversion | 2 | March 27, 2011 21:11 |
CFD-3D flow problem using Dynamic mesh method. | Sar_mech | FLUENT | 1 | November 27, 2008 21:17 |