|
[Sponsors] |
using lorentz force obtained from udfs to drive fluid |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
August 11, 2015, 12:17 |
using lorentz force obtained from udfs to drive fluid
|
#1 |
New Member
jyothsna k
Join Date: May 2014
Posts: 18
Rep Power: 11 |
Hello,
I have evaluated Lorentz forces on each cell center in a 3D model using UDFs. The forces are evaluated at the end of each time step using DEFINE_EXECUTE_AT_END. I now need to use these forces to drive the very fluid generating the force. How do i use the result from UDFs for fluid motion analysis? (Any link to sites dealing with the use of results from UDFs for fluid motion analysis would also be very much welcome) Thanks in advance |
|
Tags |
use udf results for cfd |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Error message: Insufficient Catalogue Size | Paresh Jain | CFX | 32 | February 3, 2021 03:37 |
Waterwheel shaped turbine inside a pipe simulation problem | mshahed91 | CFX | 3 | January 10, 2015 11:19 |
My Revised "Time Vs Energy" Article For Review | Abhi | Main CFD Forum | 2 | July 9, 2002 09:08 |
Terrible Mistake In Fluid Dynamics History | Abhi | Main CFD Forum | 12 | July 8, 2002 09:11 |
UDFs for Scalar Eqn - Fluid/Solid HT | Greg Perkins | FLUENT | 0 | October 11, 2000 03:43 |