CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > ANSYS > FLUENT

Fluent GUI automatically improving mesh quality on startup

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Search this Thread Display Modes
Old   June 24, 2015, 08:26
Default Fluent GUI automatically improving mesh quality on startup
New Member
Join Date: Feb 2013
Posts: 11
Rep Power: 11
cpadam is on a distinguished road
For a certain workbench project, every time I open up Fluent it automatically starts reordering my mesh and improving poor quality cells. The whole process can take up to 30 minutes, during which the GUI does not respond to user input. It is very annoying. I must have changed some setting by accident, because other projects do not do this. How can I stop Fluent from doing this? Thanks.
cpadam is offline   Reply With Quote


fluent, mesh quality

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
[snappyHexMesh] No layers in a small gap bobburnquist OpenFOAM Meshing & Mesh Conversion 6 August 26, 2015 09:38
improving mesh quality cnaksoy STAR-CD 1 March 10, 2015 05:46
[Other] Quality Mesh Analysis > relation with convergence vitorspadetoventurin OpenFOAM Meshing & Mesh Conversion 1 November 29, 2014 03:54
The fluent stopped and errors with "Emergency: received SIGHUP signal" yuyuxuan FLUENT 0 December 3, 2013 22:56
[ANSYS Meshing] ICEM, y+<1 and VORFN mesh quality problems / FLUENT aerohead ANSYS Meshing & Geometry 4 June 26, 2013 12:33

All times are GMT -4. The time now is 01:01.