[aja1345]

Hi,

When I check mesh in Fluent, the check is done but the following warning is saw, while mesh is structure and good. Is this a problem?

Grid Check

Domain Extents:
x-coordinate: min (m) = -1.152834e-001, max (m) = 1.152834e-001
y-coordinate: min (m) = -7.058838e-018, max (m) = 1.125000e+000
z-coordinate: min (m) = -3.012500e-001, max (m) = -1.847759e-001
Volume statistics:
minimum volume (m3): 2.370025e-016
maximum volume (m3): 8.590390e-007
total volume (m3): 2.225932e-002
Face area statistics:
minimum face area (m2): 1.026615e-011
maximum face area (m2): 2.521220e-004
Checking number of nodes per cell.
Checking number of faces per cell.
Checking thread pointers.
Checking number of cells per face.
Checking face cells.
Checking bridge faces.
Checking right-handed cells.
Checking face handedness.
Checking face node order.
Checking element type consistency.
Checking boundary types:
Checking face pairs.
Checking periodic boundaries.
Warning: The mesh contains very high aspect ratio hexahedral
or polyhedral cells.
The default algorithm used to compute the wall
distance required by the turbulence models might
produce wrong results in these cells.
Please inspect the wall distance by displaying the
contours of the 'Cell Wall Distance' at the
boundaries. If you observe any irregularities we
recommend the use of an alternative algorithm to
correct the wall distance.
Please select /solve/initialize/repair-wall-distance
using the text user interface to switch to the
alternative algorithm.
Checking node count.
Checking nosolve cell count.
Checking nosolve face count.
Checking face children.
Checking cell children.
Checking storage.
Done.