|
[Sponsors] |
Not able to see the 'trap' condition for a BC on a surface |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
March 27, 2016, 03:34 |
Not able to see the 'trap' condition for a BC on a surface
|
#1 |
New Member
Lolwa
Join Date: Mar 2016
Posts: 1
Rep Power: 0 |
Hello,
I am new to fluent. I wanted to find the number of particles sticking in a deposition over a cylinder. I am not able to see the choose the BC option for the outer cylinder surface (where the trapping should happen) Thanks in advance! |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Spillway Analysis Fixed Water Surface Boundary Condition | mgdenno | OpenFOAM Running, Solving & CFD | 17 | December 9, 2018 17:37 |
boundary condition of an internal surface | ynsudo | OpenFOAM Running, Solving & CFD | 7 | September 14, 2011 04:17 |
[Gmsh] boundaries with gmshToFoam | ouafa | OpenFOAM Meshing & Mesh Conversion | 7 | May 21, 2010 12:43 |
boundary condition at free surface | mike | Fidelity CFD | 3 | June 8, 2006 06:23 |
Boundary condition of free surface model | Tony | FLUENT | 3 | September 27, 2004 13:48 |