|
[Sponsors] |
Need help for simulating producer gas combustion |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
June 20, 2016, 06:08 |
Need help for simulating producer gas combustion
|
#1 |
New Member
lemthong
Join Date: May 2016
Posts: 9
Rep Power: 9 |
Hi all,
I am a newer for combustion simulation in Fluent. I would like to do simulation of biomass producer gas combustion in a cylindrical chamber with single inlet (fuel-air introduced together 1 nozzle or premixed) and outlet. This case, except premixed combustion model, can I used species transport or partial premixed model? Because I tried using premixed, but it is difficult to find Laminar Flame Speed, Critical Strain Rate and don't know how to put producer gas compositions (like co, co2, n2, h2 etc.) into fuel stream. Thank you for all responding! |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Setting the height of the stream in the free channel | kevinmccartin | CFX | 12 | October 13, 2022 21:43 |
mass flow in is not equal to mass flow out | saii | CFX | 12 | March 19, 2018 05:21 |
Need help for simulating producer gas premixed combustion | lem | FLUENT | 0 | May 28, 2016 09:39 |
error message | cuteapathy | CFX | 14 | March 20, 2012 06:45 |
Constant velocity of the material | Sas | CFX | 15 | July 13, 2010 08:56 |