|
[Sponsors] |
June 29, 2016, 06:19 |
Post-process transient results in CFD-Post
|
#1 |
New Member
Carles Sagués Mitjana
Join Date: May 2016
Posts: 8
Rep Power: 10 |
Dear Fluent/CFD-Post experts,
I am a beginner in the CFD world, so please excuse for the following basic questions: I have a transient Fluent simulation with 1020 results. In CFD-Post, several charts (4, 6-7 curves on each) have been created in order to plot evolution of pressure or velocity over time. Generating those charts takes a lot of time (more than half a day!! with no other streamlines or vector plots on the CFD-Post). Is it normal? How to speed this? Moreover, when CFD-Post is closed and reopen, charts have disappeared... I tried the Export option but it exports the curves in a csv file one after another (i.e: if you have 2 curves p=f(time) with 4 time points you end up with a csv file with headers for first curve, 4 lines for first curve and then headers for second curve and 4 lines for the second curve). Is there a way CFD-Ppost exports results over several columns or someone could share a Excel or Matlab macro to do this? Thank you very much in advance for your suggestions. Regards, Carles |
|
Tags |
export data, transient data |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
CFD results in Virtual Reality | minev | Visualization & Post-Processing | 2 | May 23, 2019 13:09 |
Post processing in CFD Post or Fluent. | Blobs | OpenFOAM Post-Processing | 2 | June 26, 2016 08:23 |
View results at a contact region in CFD post | AGP | FLUENT | 0 | June 10, 2014 12:11 |
Import external CFD results into Autodesk CFD for visualisation | julien.decharentenay | Autodesk Simulation CFD | 0 | May 31, 2014 21:16 |
Pressure results different from Function Calculator and Contour View | mariconeagles96 | CFX | 4 | May 27, 2014 22:09 |