|
[Sponsors] |
Junction nodes ... max deviation for temp. ....e+02 |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
December 8, 2016, 08:49 |
Junction nodes ... max deviation for temp. ....e+02
|
#1 |
Senior Member
Onur Özcan
Join Date: Feb 2016
Location: Istanbul/Turkey
Posts: 461
Rep Power: 12 |
Hi all,
I have just faced a bizarre thing following doing reorder>domain and check >mesh, Is there anyone who has experience about this thing? Kind Regards, Last edited by oozcan; December 9, 2016 at 01:55. |
|
December 9, 2016, 01:56 |
|
#2 |
Senior Member
Onur Özcan
Join Date: Feb 2016
Location: Istanbul/Turkey
Posts: 461
Rep Power: 12 |
you could find it attached
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
y+ and u+ values with low-Re RANS turbulence models: utility + testcase | florian_krause | OpenFOAM | 114 | August 23, 2023 05:37 |
Near wall treatment in k-omega SST | Arnoldinho | OpenFOAM Running, Solving & CFD | 38 | March 8, 2017 13:48 |
Problem of simulating of small droplet with radius of 2mm | liguifan | OpenFOAM Running, Solving & CFD | 5 | June 3, 2014 02:53 |
On the damBreak4phaseFine cases | paean | OpenFOAM Running, Solving & CFD | 0 | November 14, 2008 21:14 |
Could anybody help me see this error and give help | liugx212 | OpenFOAM Running, Solving & CFD | 3 | January 4, 2006 18:07 |