CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

naca section simulation for different cavitation number

Register Blogs Members List Search Today's Posts Mark Forums Read

Like Tree1Likes
  • 1 Post By SPH_CFD

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 1, 2017, 14:04
Default naca section simulation for different cavitation number
  #1
New Member
 
MAHDI-UL-ISHTIAQUE
Join Date: May 2017
Posts: 6
Rep Power: 6
ishtiaque abir is on a distinguished road
"How the simulation can be done by Ansys (fluent) around a naca(0021) for different cavitation number at a fixed angle of attack. Please help me in this regards with tutorials.
ishtiaque abir is offline   Reply With Quote

Old   June 4, 2017, 12:47
Default
  #2
Member
 
Quang Le Dang
Join Date: Jun 2012
Posts: 61
Rep Power: 11
SPH_CFD is on a distinguished road
Quote:
Originally Posted by ishtiaque abir View Post
"How the simulation can be done by Ansys (fluent) around a naca(0021) for different cavitation number at a fixed angle of attack. Please help me in this regards with tutorials.
Please search "cavitation model in FLUENT".There are a lot of tutorials for you. It is quite easy to follow these tutorials and then continue with your own problem
ishtiaque abir likes this.
SPH_CFD is offline   Reply With Quote

Old   June 5, 2017, 02:52
Default
  #3
New Member
 
MAHDI-UL-ISHTIAQUE
Join Date: May 2017
Posts: 6
Rep Power: 6
ishtiaque abir is on a distinguished road
Thank u very for your help... hope that can serve my purposes

Sent from my Symphony R100 using CFD Online Forum mobile app
ishtiaque abir is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Decomposing meshes Tobi OpenFOAM Pre-Processing 20 October 1, 2021 11:51
[Other] Can't Shake Erros: patch type 'patch' not constraint type 'empty' BrendaEM OpenFOAM Meshing & Mesh Conversion 11 August 24, 2018 13:03
[snappyHexMesh] sHM layer process keeps getting killed MBttR OpenFOAM Meshing & Mesh Conversion 4 August 15, 2016 04:21
dsmcInitialise - dsmcFoam archymedes OpenFOAM Pre-Processing 94 July 15, 2016 17:14
Compressor Simulation using rhoPimpleDyMFoam Jetfire OpenFOAM Running, Solving & CFD 107 December 9, 2014 14:38


All times are GMT -4. The time now is 13:34.