|
[Sponsors] |
December 13, 2017, 09:24 |
micro combustion
|
#1 |
Member
tahir
Join Date: May 2010
Posts: 35
Rep Power: 15 |
I am studying micro combustion. I have two inlets and one outlet. The mixture consist of 25 species and 34 reaction.
the dimension of combustor is 100 mm length and 7 mm height (2D). there is a porous medium in the middle of combustor of 10mm length. the inlet velocity of fuel is 1.06 and inlet velocity of air is 0.40. when i choose the mesh of 1mm, i get good results but when i reduce the mesh to 0.5mm, my results changed drastically. Also if reduce the fuel velocity to three times, i get good results. Anybody having the same problem. Kindly give me suggestion. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
combustion at micro scale | ENGRTAHIR | FLUENT | 6 | December 3, 2018 11:18 |
Modelling Combustion in Porous Zone | tanjinjack | FLUENT | 2 | September 26, 2016 04:10 |
modelling combustion in micro gas turbine | zackufairu | ANSYS | 0 | April 10, 2015 02:33 |
Hydrogen Air combustion in a combustion chamber | popi | CFX | 7 | July 11, 2007 18:40 |
micro combustion | cfdguy | Main CFD Forum | 0 | June 21, 2005 20:39 |