CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

set up DPM model in fluent

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 20, 2018, 10:39
Default set up DPM model in fluent
  #1
Senior Member
 
ali
Join Date: Jul 2016
Posts: 147
Rep Power: 9
ebtedaei is on a distinguished road
Hi All,
I have 3 questions:

1- When you want to see the particle simulation results (particles fate) in the Particle Tracks window and click on Track or Display, it does not show particles fate !!! there Just is inside the console the following phrase:
DPM Iteration...

That is, it does not show how many particles were tracked? How many particles were escaped? How many particles have been aborted? ...

Of course, to display the particle information (particles fate), we can select the "summary" option in particle tracks window, but I want to display particles fate without selecting this option and by clicking on the display bottom.

2- Why is the pulse option disabled in the particles tracks window? What should I do to activate this option?
In fact, how can I create particles's animation in Fluent?

3. I changed the feed flow rate from 1 ton per hour to 30 kg per hour (the reduction in the number of particles) but the problem solving speed (simulation time) did not change much!!! Why does this happen? I expected the problem solving speed to be increased by reducing feed flow rate (reducing the number of input particles).

Thanks,
Ali
ebtedaei is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
looking for a smart interface matlab fluent chary FLUENT 24 June 18, 2021 09:07
Question about Fluent DPM erosion model zdz198728 FLUENT 6 April 1, 2017 03:49
Overflow Error in Multiphase Modelling with Two Continuous Fluids ashtonJ CFX 6 August 11, 2014 14:32
How to create a 3Ds Car Model importing to FLUENT? spysunny Main CFD Forum 1 January 10, 2012 23:40
DPM model in FLUENT J├╝rgen Schmidt FLUENT 0 October 27, 2005 14:39


All times are GMT -4. The time now is 03:23.