|
[Sponsors] |
June 7, 2018, 20:44 |
Divergence in FLUENT with Density-Solver
|
#1 |
New Member
Noix
Join Date: May 2018
Posts: 13
Rep Power: 7 |
Hello everyone.
I'm trying to model a charging gas tank: a cylindrical canister that starts on let's say, 1 bar of pressure and has only a single inlet with a pressure-inlet condition of 8 bar. For now, it doesn't really matter what gas it is. That problem sounds extremely simple, but I'm facing heavy troubles with just making that work. All I have is a 3D cylinder (it needs to be modelled as 3D) with another smaller cylinder connected to it as to simulate a gas line. I'm using an ideal-gas density model for my material (air), and no matter what starting conditions I put in initialization the problem quickly diverges with the folllowing errors: # Divergence detected in AMG solver: Coupled -> Decreasing coarsening group size! # Divergence detected in AMG solver: Coupled -> Increasing relaxation sweeps! # You may try the enhanced divergence recovery with (rpsetvar 'amg/protective-enhanced? #t) I've attached some screenshots of my current attempt. I'm really out of ideas at this point. I tried refining the mesh to no avail. I'm pretty sure the problem has to be something with the geometry or my initialization. Any suggestions? Thanks for your time. |
|
June 10, 2018, 19:50 |
|
#2 |
New Member
Noix
Join Date: May 2018
Posts: 13
Rep Power: 7 |
Update: I think it has something to do with either my mesh or my problem initilization. I ran other geometries and they are just fine. Or maybe my dimentions are too small?
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
How can I avoid Divergence when simulating a boiling flux in FLUENT | P_VS | Fluent Multiphase | 0 | July 14, 2016 08:59 |
AMG solver divergence; | Mike | FLUENT | 17 | December 14, 2015 13:01 |
Fluidized Bed: Error: Divergence detected in AMG solver: pressure correction Error Ob | Mole89 | FLUENT | 5 | April 12, 2014 09:32 |
Divergence detected in AMG solver: k, epsilon, pressure coupled | Tanjina | FLUENT | 5 | January 13, 2014 10:46 |
Strange residuals of the Density Based Solver | Pat84 | FLUENT | 0 | October 22, 2012 15:59 |