CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

6DOF- Calculation of rotating velocity on a turbine

Register Blogs Community New Posts Updated Threads Search

Like Tree1Likes
  • 1 Post By GregCFD

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 18, 2018, 03:47
Default 6DOF- Calculation of rotating velocity on a turbine
  #1
New Member
 
mamly
Join Date: Sep 2010
Posts: 12
Rep Power: 15
mamly is on a distinguished road
Hello guys

I've simulated a wind turbine which rotate with wind velocity. it seems everything is OK,but I need to know the rotating speed (rpm) of the wing turbine. How can I calculate this parameter on CFD-post?

Best
mamly is offline   Reply With Quote

Old   July 18, 2018, 04:22
Default
  #2
Member
 
Join Date: May 2016
Posts: 38
Rep Power: 9
GregCFD is on a distinguished road
How I would do it, (I just tried this with a simulation at a set speed and got reasonable close to the set RPM), is to put a point somewhere on the surface of the turbine (the tip is good), from this point you can get the local "velocity in the stationary frame" (which as the point is attached to fluid up against the blade and assuming that the no-slip condition is applied should give you the local velocity of the blade) and the position of the point from the hub. With those two pieces of information it's straightforward to calculate the RPM.
mamly likes this.
GregCFD is offline   Reply With Quote

Reply

Tags
6dof, fluent 18.2, rotating speed, wind turbines


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Rotating Wind turbine rotor model step up shiyun CFX 3 November 6, 2017 10:34
Cd calculation when velocity is varying with time eddykendo OpenFOAM Running, Solving & CFD 1 September 29, 2015 19:36
6dof for rotation of turbine: unable to fix the center Havinh Fluent UDF and Scheme Programming 0 August 5, 2015 05:35
VELOCITY vs VELOCITY IN STN FRAME vs RELATIVE VELOCITY everest20 FLUENT 1 July 13, 2015 08:35
how to know the turbine rotating speed? Cafard CFX 11 July 14, 2014 03:25


All times are GMT -4. The time now is 14:03.