Courant number in transient multiphase flow

pszor · July 26, 2018, 06:58

Hello.

I've read fluent tutorials and it is stated that the Courant number should be between 1 and 10 in transient multiphase flow.

In my opinion, Courant should be always below one for explicit methods. Can you explain to me why it is adviced to use a Courant between those numbers?

Thanks

LuckyTran · July 29, 2018, 11:46

Which multiphase model are you using and are you using an explicit one? If you use an implicit solver then you don't need Co<1 and this number isn't even 1 for every problem.

Everyone has their opinions. You say less than 1 but does that mean 0.001 or 0.99 and also why?

July 26, 2018, 06:58	Courant number in transient multiphase flow	#1
pszor New Member Join Date: Jul 2018 Posts: 1 Rep Power: 0	Hello. I've read fluent tutorials and it is stated that the Courant number should be between 1 and 10 in transient multiphase flow. In my opinion, Courant should be always below one for explicit methods. Can you explain to me why it is adviced to use a Courant between those numbers? Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[General] Extracting ParaView Data into Python Arrays	Jeffzda	ParaView	30	November 6, 2023 22:00
courant number increases to rather large values	6863523	OpenFOAM Running, Solving & CFD	22	July 6, 2023 00:48
[snappyHexMesh] Error snappyhexmesh - Multiple outside loops	avinashjagdale	OpenFOAM Meshing & Mesh Conversion	53	March 8, 2019 10:42
decomposePar -allRegions	stru	OpenFOAM Pre-Processing	2	August 25, 2015 04:58
courant number for transient flow on CFX ?	amine	CFX	13	August 20, 2013 20:02

July 29, 2018, 11:46		#2
LuckyTran Senior Member Lucky Join Date: Apr 2011 Location: Orlando, FL USA Posts: 5,837 Rep Power: 68	Which multiphase model are you using and are you using an explicit one? If you use an implicit solver then you don't need Co<1 and this number isn't even 1 for every problem. Everyone has their opinions. You say less than 1 but does that mean 0.001 or 0.99 and also why?