Home > Forums > Software User Forums > ANSYS > FLUENT

Modeling furnace simulation with porous media and MRF at high temperature with FLUENT

Mark Forums Read

Reply

Search this Thread

February 22, 2019, 06:41	Modeling furnace simulation with porous media and MRF at high temperature with FLUENT	#1
J_Pratik New Member Pratik Join Date: Jun 2017 Posts: 2 Rep Power: 0	I am trying to simulate an enclosed calcining furnace without any inlet or outlet. The domain has multiple porous zones shared with fluid zone and walls. Also fluid domain has fan modeled with MRF approach. Will it be possible to simulate such a case in Fluent at steady state at high temperature of about 1100 degree C? Discussion related similar to case will be appreciated

Reply

« Previous Thread | Next Thread »

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Using MRF relative velocity concept for Porous Media	Tempest	OpenFOAM Programming & Development	1	November 27, 2016 23:02
relative velocity resistance formulation, porous media	arminheidari	FLUENT	0	January 7, 2013 05:02

All times are GMT -4. The time now is 01:33.