Problem with colormap V. 19.1

axelosc · February 26, 2019, 13:22

Hi everybody.

I have recently changed to the Ansys Fluent version 19.1 and i have a problem with the colormap of a contour.
As you can see in the attached image, the text overlap to the color map!! and i don´t know how to change that.

Anybody has the same problem?

Please help, it´s really a headache!

nikhilkulkarni4013 · May 23, 2019, 09:45

Hi,

I have came across the same problem ! Have you found any solution?

axelosc · May 23, 2019, 10:58

Hi,

No, Only to open with CFD post, but is very annoying.

AlexanderZ · May 23, 2019, 22:22

viewing-> options -> switch off Titles

best regards

axelosc · May 24, 2019, 10:13

Hi
Thank you for your answer, however, the "switch off Titles" option only enable o disable the title below the contour but not the title above the colormap.

Best regards.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Other] engineFoam new mesh problem	ayhan515	OpenFOAM Meshing & Mesh Conversion	5	August 10, 2015 08:45
UDF compiling problem	Wouter	Fluent UDF and Scheme Programming	6	June 6, 2012 04:43
Gambit - meshing over airfoil wrapping (?) problem	JFDC	FLUENT	1	July 11, 2011 05:59
natural convection problem for a CHT problem	Se-Hee	CFX	2	June 10, 2007 06:29
Adiabatic and Rotating wall (Convection problem)	ParodDav	CFX	5	April 29, 2007 19:13

May 23, 2019, 09:45		#2
nikhilkulkarni4013 New Member Nikhil Join Date: Jun 2017 Posts: 19 Rep Power: 8	Hi, I have came across the same problem ! Have you found any solution?

May 23, 2019, 10:58		#3
axelosc New Member Alejandro Join Date: Aug 2015 Posts: 9 Rep Power: 10	Hi, No, Only to open with CFD post, but is very annoying.

May 23, 2019, 22:22		#4
AlexanderZ Senior Member Alexander Join Date: Apr 2013 Posts: 2,363 Rep Power: 34	viewing-> options -> switch off Titles best regards

May 24, 2019, 10:13		#5
axelosc New Member Alejandro Join Date: Aug 2015 Posts: 9 Rep Power: 10	Hi Thank you for your answer, however, the "switch off Titles" option only enable o disable the title below the contour but not the title above the colormap. Best regards.