|
[Sponsors] |
April 26, 2019, 06:43 |
Reverse flow problem
|
#1 |
New Member
Join Date: Nov 2018
Posts: 14
Rep Power: 7 |
Hello guys,
I have a problem with my domain. It is a simple domain, but it has problems with reverse flow. I can't really understand what is the problem. I have simple inlet flow set at 7 m/s as shown in the attachments below and a pressure outlet set to 0. Symmetry conditions are applied around the sides of domain and a transient analysis has been set. Probably it is something easy to solve but I can't really understand why it is not working. I've also tried to change the orientation of the surfaces and to set the outflow in place of pressure outlet, but nothing happened. Thank you for any advice. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Problem with porous flow at multi-material interface with large permeability diff. | Hisham | OpenFOAM Programming & Development | 1 | June 3, 2016 10:51 |
Reverse flow at the outlet | Mohammad80 | FLUENT | 0 | March 30, 2016 04:31 |
Two Mass flow inlet bc convergence problem | nabidinhomessi | Main CFD Forum | 5 | December 14, 2015 07:11 |
Reverse flow and results does not converge | irenefong92 | STAR-CCM+ | 1 | February 4, 2015 15:28 |
Reverse Flow Problem. (Hull with a Bulbous Bow )Towing Tank simulation. | Nyarla | Siemens | 2 | March 13, 2012 19:04 |