Extra walls in Boundary Conditions

khan.nawaz0786 · August 19, 2019, 05:41

Hello,
I am new to ANSYS
I have encounter an issue on physics setup. Additional Walls on the boundary condition are added with the name wall 16 , wall 17, wall 18; wall 19 etc. how can i know which part of the geometry have these walls?

Far · August 20, 2019, 06:59

Quote:

Originally Posted by khan.nawaz0786

Hello,
I am new to ANSYS
I have encounter an issue on physics setup. Additional Walls on the boundary condition are added with the name wall 16 , wall 17, wall 18; wall 19 etc. how can i know which part of the geometry have these walls?

Display them and see where these are located.

khan.nawaz0786 · August 21, 2019, 00:04

I tried to display it. it can not. Also, A note: zone-surface: cannot create surface from sliding interface zone. Creating empty surface..
Please help me to sort out

Far · August 21, 2019, 05:33

Quote:

Originally Posted by khan.nawaz0786

I tried to display it. it can not. Also, A note: zone-surface: cannot create surface from sliding interface zone. Creating empty surface..
Please help me to sort out

Then these extra wall are generated due to interfaces. It is common thing with interface boundary. No need to worry, continue your simulation.

August 19, 2019, 05:41	Extra walls in Boundary Conditions	#1
khan.nawaz0786 New Member Khan Join Date: Aug 2019 Posts: 2 Rep Power: 0	Hello, I am new to ANSYS I have encounter an issue on physics setup. Additional Walls on the boundary condition are added with the name wall 16 , wall 17, wall 18; wall 19 etc. how can i know which part of the geometry have these walls? Last edited by khan.nawaz0786; August 19, 2019 at 05:44. Reason: image of geometry is not attached

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fluid Domain moving with Rigid body	Lloyd Sullivan	CFX	3	August 17, 2018 09:58
CFD analaysis of Pelton turbine	amodpanthee	CFX	31	April 19, 2018 18:02
Out File does not show Imbalance in %	Mmaragann	CFX	5	January 20, 2017 10:20
Waterwheel shaped turbine inside a pipe simulation problem	mshahed91	CFX	3	January 10, 2015 11:19
An error has occurred in cfx5solve:	volo87	CFX	5	June 14, 2013 17:44

August 21, 2019, 00:04		#3
khan.nawaz0786 New Member Khan Join Date: Aug 2019 Posts: 2 Rep Power: 0	I tried to display it. it can not. Also, A note: zone-surface: cannot create surface from sliding interface zone. Creating empty surface.. Please help me to sort out