|
[Sponsors] |
January 7, 2020, 03:48 |
combustion burner model
|
#1 |
New Member
|
I am modeling a 11mw industrial burner with methane and 20% exceed air. air mass flow rate is 4kg/s and methane mass flow rate is 0.2kg/s. around the combustion chamber fill with water. mass flow rate of water is 100kg/s and cool chamber. i used non premixed combustion and DO for radiation. stack tempereture is in order of 1000C and its very high. difference of inlet and outlet water is 10C. how to reduce stack temperature to 600C.
|
|
Tags |
combustion, high temperature, stack, temperature |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
problem in the ECFM combustion model | Georges Thomas | CONVERGE | 1 | August 7, 2017 17:00 |
partial premixed combustion model early combustion than expected | omaradel | FLUENT | 0 | June 27, 2017 15:38 |
Overflow Error in Multiphase Modelling with Two Continuous Fluids | ashtonJ | CFX | 6 | August 11, 2014 15:32 |
coal combustion model | yingkun | OpenFOAM Running, Solving & CFD | 0 | October 7, 2011 00:44 |
can alternate combustion model by UDF? | Han Xingsi | FLUENT | 0 | September 1, 2008 03:08 |