|
[Sponsors] |
April 12, 2021, 08:12 |
CFD of Nozzle with Chevrons
|
#1 |
New Member
Join Date: Apr 2021
Posts: 1
Rep Power: 0 |
Hello!
I have been trying to analyse nozzle with chevrons at the end. I made the geometry and extracted the fluid domains (for fine and coarse meshing) and meshed with mostly default settings. After running the solution with the k-epsilon model, the nozzle outlet's velocity is coming out to be a lot lower than what it should be compared to theoretical calculations. Is there any advice you would like to give? I am a beginner in CFD. I have also attached an image of the model. |
|
Tags |
chevron, nozzle, nozzle simulation |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Inverse Design Optimization | khavart | SU2 Shape Design | 0 | June 20, 2019 04:37 |
CFD of Plasma Spray nozzle | pblee_99 | FLUENT | 0 | August 5, 2010 11:09 |
compressible flow in a counterflow nozzle | d.vamsidhar | FLUENT | 0 | November 24, 2005 02:45 |
Where do we go from here? CFD in 2001 | John C. Chien | Main CFD Forum | 36 | January 24, 2001 22:10 |
Which is better to develop in-house CFD code or to buy a available CFD package. | Tareq Al-shaalan | Main CFD Forum | 10 | June 13, 1999 00:27 |