Thesis project

Spyrosbot · July 1, 2021, 06:19

Hello everyone,

I will be working on CFD analysis of pathogenic aerosols in indoors spaces for my thesis. I will be analysing a classroom in the UK with 30 pupils (BB101).
As I am new to CFD any useful input on how to create a geometry of a classroom and how to add people inside it and everything related to it would be more than appreciated!

Best regards,
Spyros

Martin_Sz · July 1, 2021, 06:32

In first If U dont have commercial programs - pick freeCad to make 3d model
In second - try to maximize to simplicity the model
SIMPLE CUBE - with Simple Rollers (as pupils inside) , shelves cabines as simple cubes too.
For first simualtiomn make simple single flow analysis of model. and add models in each subsequent steps
Best regards

July 1, 2021, 06:19	Thesis project	#1
Spyrosbot New Member Spyros Botetsios Join Date: Jul 2021 Posts: 2 Rep Power: 0	Hello everyone, I will be working on CFD analysis of pathogenic aerosols in indoors spaces for my thesis. I will be analysing a classroom in the UK with 30 pupils (BB101). As I am new to CFD any useful input on how to create a geometry of a classroom and how to add people inside it and everything related to it would be more than appreciated! Best regards, Spyros

July 1, 2021, 06:32		#2
Martin_Sz Senior Member Marcin Join Date: May 2014 Location: Poland, Swiebodzin Posts: 232 Rep Power: 12	In first If U dont have commercial programs - pick freeCad to make 3d model In second - try to maximize to simplicity the model SIMPLE CUBE - with Simple Rollers (as pupils inside) , shelves cabines as simple cubes too. For first simualtiomn make simple single flow analysis of model. and add models in each subsequent steps Best regards __________________ Quick Tips and Tricks, Tutorials FLuent/ CFX (CFD) https://howtooansys.blogspot.com/

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CoCoons Project - Community-driven Documentation on OpenFOAM® Technology	holger_marschall	OpenFOAM Announcements from Other Sources	6	February 2, 2022 14:42
[blockMesh] Projection of edges to the surface	klitz	OpenFOAM Meshing & Mesh Conversion	0	October 14, 2020 10:09
Looking for help with my graduation thesis project	igor_vidic	CFD Freelancers	7	July 25, 2019 14:59
MSc Thesis Project - Tube-in-Tank HE with PCM	Tapeworm	FLUENT	22	May 22, 2017 03:00
Undergraduate thesis project	Shadhanan Manickavasagar	FLUENT	5	August 19, 2000 22:59