CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Profile input for cell zones FLUENT

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 14, 2023, 21:41
Post Profile input for cell zones FLUENT
  #1
New Member
 
Gregori
Join Date: Nov 2018
Location: Uberlāndia - Minas Gerais, Brazil
Posts: 8
Rep Power: 7
greg93 is on a distinguished road
Hi everyone,

I need to get the 2D results from a face of a cylinder and replicate these values along its length (according to the number of elements in this direction), so I obtain an initial 3D field of Incident Radiation (the variable that I need to keep with fixed values) in the tube. I need to do this approach rather than simulate the DO model in a 3D solver because the time and the amount of memory necessary to do this are not feasible.

The thing is, I'm trying to use a simple Profile approach, by testing first the transference of 2D results from a determined cell zone (not a boundary) to the same cell zone in a non-initialized case.

When I do this, It seems that the results were not correctly loaded in the cell region of the non-initialized case. Does anybody know if this is the right approach and how to use properly the Profile approach for cell zones in Fluent?
greg93 is offline   Reply With Quote

Reply

Tags
do model, fluent, profile, radiation

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
how to run fluent from matlab without using aas toolbox? artemis96 ANSYS 7 May 23, 2022 12:16
How does FLUENT caculate velocity profile at wall when shear is specified? Faizan89 FLUENT 2 June 5, 2021 12:04
Fluent UDF - polynomial profile description mihnea333 FLUENT 0 February 26, 2021 03:19
[Workbench] Creation of Cell Zones for processing in FLUENT kailingkk ANSYS Meshing & Geometry 0 October 5, 2013 05:09
Problem in IMPORT of ICEM input file in FLUENT csvirume FLUENT 2 September 9, 2009 01:08


All times are GMT -4. The time now is 13:43.