|
[Sponsors] |
February 7, 2024, 13:11 |
Issue regarding [out of date] mesh in fluent
|
#1 |
New Member
aditi
Join Date: Nov 2022
Posts: 5
Rep Power: 3 |
I have a geometry in which there is a tube_wall seperating two fluids, making it a case of conjugate heat transfer. When this mesh is read in the fluent, tube_wall appears as interior in boundary conditions. Now when i change this to "wall from interior", tube_wall and tube_wall-shadow are created. All this seems to be in right direction as conjugate heat transfer needs to be solved.
However, after the wall and shadow wall are created, the fluent figure tab shows " [out of date] mesh". I had done shared topology in space claim as well. what should I do to resolve this? Any help would be appreciated. Thanks |
|
Tags |
out of date mesh, wall shadow interface |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[snappyHexMesh] SnappyHexMesh/splitMeshRegion : region1 in zone "-1" | GuiMagyar | OpenFOAM Meshing & Mesh Conversion | 3 | August 4, 2023 12:38 |
[Gmsh] GMSH : structured mesh issue | bibiboom | OpenFOAM Meshing & Mesh Conversion | 0 | May 17, 2017 18:49 |
[snappyHexMesh] SnappyHexMesh for internal Flow | vishwa | OpenFOAM Meshing & Mesh Conversion | 24 | June 27, 2016 08:54 |
Issue with arbitrary Lagrangian-Eulerian method and mesh optimization | mikolchon | Main CFD Forum | 0 | August 16, 2014 15:50 |
[ICEM] Generating Mesh for STL Car in Windtunnel Simulation | tommymoose | ANSYS Meshing & Geometry | 48 | April 15, 2013 04:24 |