|
[Sponsors] |
October 18, 2000, 22:56 |
two layer zonal model
|
#1 |
Guest
Posts: n/a
|
How can we include a change in the roughness parameter for the wall when using a k-epsilon two layer zonal model in Fluent 5?
|
|
October 19, 2000, 04:04 |
Re: two layer zonal model
|
#2 |
Guest
Posts: n/a
|
The roughness parameter is introduced in the wall function approach in order to describe the shift of the velocity distribution of the log law. If You use the two layer zonal model, You calculate the velocity distribution near the wall but outside the viscous sublayer using a special turbulence model. Thus there is no empirical constant like the roughness parameter in Your model.
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Use of k-epsilon and k-omega Models | Jade M | Main CFD Forum | 40 | January 27, 2023 07:18 |
Turbulent Boundary Layer on a Flat Plate | Hoshang Garda | FLUENT | 1 | November 27, 2013 10:24 |
Solving boundary layer with k-e model | Gearb0x | OpenFOAM Running, Solving & CFD | 6 | January 24, 2013 04:40 |
Water subcooled boiling | Attesz | CFX | 7 | January 5, 2013 03:32 |
DPM model w/ Wave model - errors in documentation | HS | FLUENT | 0 | April 12, 2006 04:37 |