|
[Sponsors] |
March 25, 2001, 05:50 |
about energy source in fluent5.4
|
#1 |
Guest
Posts: n/a
|
Hi,
Now I have a problem about energy source in fluent5.4. Fluent5.4 solves the energy equation in the form including Sh(energy source)."Sh(energy source) includes heat of chemical reaction,and any other volumetric heat sources you have defined."But the chemical reaction examples in fluent5 tutorial guide do not add any energy source.How do fluent solve it? In gambit I define seperated "fluid region".I want to add mass source into the "fluid region".If I do not define energy source at the same time,the temperature in the "fluid region" is very low.If I define energy source at the same time,the temperature in the "fluid region" seem to be correct. But I don't know how much energy source I should add. Wolud you give me some advice?Any answner will be welcome. Thank you. |
|
March 26, 2001, 01:13 |
Re: about energy source in fluent5.4
|
#2 |
Guest
Posts: n/a
|
I might give you some advise if you let me know your problem in detail because I have experience to add mass and enery source. Especially, which species are you going to add as mass source ? Fuel, oxidant or product ? And, it is, I think, fairly unusual to add two sources simultaneously. So, why are you going to add mass & energy source simultaneously ?
Sincerely, Jinwook |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[swak4Foam] swak4foam building problem | GGerber | OpenFOAM Community Contributions | 54 | April 24, 2015 17:02 |
DxFoam reader update | hjasak | OpenFOAM Post-Processing | 69 | April 24, 2008 02:24 |
DecomposePar links against liblamso0 with OpenMPI | jens_klostermann | OpenFOAM Bugs | 11 | June 28, 2007 18:51 |
UDF Scalar Code: HT 1 | Greg Perkins | FLUENT | 8 | October 20, 2000 13:40 |
UDFs for Scalar Eqn - Fluid/Solid HT | Greg Perkins | FLUENT | 0 | October 14, 2000 00:03 |