CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Connected faces in Gambit

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 26, 2002, 14:12
Default Connected faces in Gambit
  #1
Yuehui Qin
Guest
 
Posts: n/a
Hello all Fluent experienced users,

I am a new user of Fluent and am now working on a project dealing with film cooling using hemispherical (quarter hemisphere) cavities. The geometry is a simple channel with three cavities on two of the symmetrical walls, totallly 6 cavities. Each of the cavities was split into half, and meshed individually using Tet premitive scheme with Hex elements.The octant was then copied using reflex to create a quarter hemisphere. By the way, I created one cavity and then copied it to other 5 locations.

I have been able to create the grid in Gambit, but problem occur when I imported the grid to Fluent 6.

************************** Building...

grid,WARNING: no face with given nodes. Thread 2, cell 122482 Error: Build_Grid: grid error.

Clearing partially read grid. ***************************

I figured out it's because I connected two overlapping faces when the cavity volume was attached to the channel.( Without connecting the faces, Fluent will automatically take that face as wall.) The puzzling part is it works fine for the three cavities on one side, but didn't work for the other three at the symmetrical side.

Could anyone experienced in Fluent give me some suggestions?

Thanks in advance
  Reply With Quote

Old   August 27, 2002, 04:56
Default Re: Connected faces in Gambit
  #2
anna
Guest
 
Posts: n/a
i have met this kind of problem before, maybe you have chosse a fault solver,or some mistakes occured when you mesh them.
  Reply With Quote

Old   September 25, 2002, 19:46
Default Re: Connected faces in Gambit
  #3
Alamgir
Guest
 
Posts: n/a
U should do copy/paste before any type of meshing, and all geometry connected before meshing, after meshing u r not permitted to change its entity.

Alamgir
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere! sc298 OpenFOAM Meshing & Mesh Conversion 2 March 27, 2011 21:11
DecomposePar unequal number of shared faces maka OpenFOAM Pre-Processing 6 August 12, 2010 09:01
[snappyHexMesh] external flow with snappyHexMesh chelvistero OpenFOAM Meshing & Mesh Conversion 11 January 15, 2010 19:43
CheckMeshbs errors ivanyao OpenFOAM Running, Solving & CFD 2 March 11, 2009 02:34
CheckMeshbs errors ivanyao OpenFOAM Running, Solving & CFD 0 March 10, 2009 22:07


All times are GMT -4. The time now is 07:40.