CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > ANSYS > FLUENT

Text command

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Search this Thread Display Modes
Old   March 28, 2003, 09:05
Default Text command
Posts: n/a
How can I define the number of skip in path-line using text command?

I am trying to save the path-line at every timestep.

e.g Solve > monitors > command display path-line velocity-magnitude 3 5, 180

I've managed to define sufaces(3 and 5) and velocity range(0 ~ 180) but not sure how to define the skip number using text command.

Any input would be appreciated.

Thanks sam
  Reply With Quote

Old   March 28, 2003, 09:19
Default Re: Text command
Posts: n/a
well, just find out that 5 is the skip number, then I need to know how to select more than one surface. thanks
  Reply With Quote

Old   April 2, 2003, 05:24
Default Re: Text command
Vlad S
Posts: n/a
Hello! Try the command which will ask Fluent to write each timestep. That should work. Good luck.
  Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
OpenFOAM 1.7.1 installation problem on OpenSUSE 11.3 flakid OpenFOAM Installation 16 December 28, 2010 08:48
Command to render text output from each mesh block pgopalak FLOW-3D 3 October 2, 2009 18:32
Installation OF1.5-dev ttdtud OpenFOAM Installation 46 May 5, 2009 02:32
OpenFOAM15 installables are incomplete problem with paraFoam tryingof OpenFOAM Bugs 17 December 7, 2008 04:41
Regarding FoamX running Kindly help out hariya03 OpenFOAM Pre-Processing 0 April 18, 2008 04:26

All times are GMT -4. The time now is 09:07.