|
[Sponsors] |
quickly select the surfaces in the same direction |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
June 16, 2003, 10:18 |
quickly select the surfaces in the same direction
|
#1 |
Guest
Posts: n/a
|
Hi, all
As I built many buildings (nearly several hundreds) in my model by Gambit2.0.4, I wonder if there is a good to way to only select the top surfaces of all buildings. Any hint is welcome. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
how to get forces on Iso-Clip Surfaces and How to get forces in cylindrical coordinat | CFD XUE | FLUENT | 3 | March 18, 2015 03:28 |
[snappyHexMesh] snappyHexMesh not refining surfaces | Hydro1004 | OpenFOAM Meshing & Mesh Conversion | 3 | August 29, 2012 11:56 |
In CFX workbench, which surface, i have to select | senCFX | CFX | 19 | December 19, 2011 01:31 |
[ICEM] Changing edge direction | la7low | ANSYS Meshing & Geometry | 2 | June 7, 2010 13:26 |
Need an advicewhat direction select to work in CFD | Michail | Main CFD Forum | 4 | August 4, 2003 10:54 |