CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

How to limit values of a UDS?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 15, 2012, 04:43
Default How to limit values of a UDS?
  #1
New Member
 
Toni Pujol
Join Date: Jun 2009
Posts: 6
Rep Power: 16
tsagaro is on a distinguished road
Hi everybody,

Is there any way to limit the value of a UDS like temperature in the "limits" option in the "run calculation" dialog box?

I have tried with DEFINE_ADJUST but it does not work.
tsagaro is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to set solution limit for UDS? Lobby FLUENT 4 February 28, 2020 06:48
limit high velocity values riesotto OpenFOAM 7 July 25, 2016 15:28
UDS stored to UDM do not show the same values swati_mohanty FLUENT 0 December 3, 2010 04:46
[ICEM] Edge Params - Spacing limit values shogologo ANSYS Meshing & Geometry 4 October 19, 2009 22:49
Setting fixed values with UDS Andrew Garrard FLUENT 3 February 2, 2004 11:00


All times are GMT -4. The time now is 23:42.