|
[Sponsors] |
November 10, 2004, 23:11 |
resistance to droplets in porous media
|
#1 |
Guest
Posts: n/a
|
when droplets pass through porous media, resistance force must be placed on droplets due to the existence of solid parts in porous media. i dont know how to simulate this using fluent, does someone have the experience about this problem?
|
|
November 14, 2004, 12:16 |
Re: resistance to droplets in porous media
|
#2 |
Guest
Posts: n/a
|
what is your porous medium? by droplets do you mean some type of liquid seepage? or it is some saturated vapor circulating in your medium?
|
|
November 17, 2004, 11:52 |
Re: resistance to droplets in porous media
|
#3 |
Guest
Posts: n/a
|
thank you very much for your responses.the porous is sic foam.droplets injected in computation zone are evaporated and impated at the porous surface .my question is how to simulate the resistance force by porous medium using porous model in fluent. thank you again.
|
|
November 22, 2004, 09:37 |
FLUENT VS STAR-CD
|
#4 |
Guest
Posts: n/a
|
Dear sirs, Has anybody used Fluent for modeling a porous media (catalyc convertor) ,I cant get as same result as when Star-cd has been used for modeling this prous media project, I would be thankful to hear any openion, Best Mohsen
|
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Multiphase Porous Media Flow - Convergence Issues | VT_Bromley | FLUENT | 8 | May 30, 2024 03:59 |
Porous media setup issues in Fluent | Bernard Van | FLUENT | 29 | January 26, 2017 05:09 |
viscous resistance coefficients in Porous media | choyong | FLUENT | 9 | December 15, 2014 21:01 |
Gas generation with resistance in porous media | billow | Phoenics | 5 | June 21, 2011 19:11 |
porous media: Fluent or Star-CD? | Igor | Main CFD Forum | 0 | December 5, 2002 16:16 |