Nucleate boiling using VOF

January 6, 2005, 14:24

Hello,

I am trying to model Nucleate boiling using the VOF model available in Fluent. I would appreciate it if anybody could give some suggestions on how to define the interface between the vapor phase and the liquid phase.Thanks in advance.

Akash

January 7, 2005, 17:13

there is a tutorial that you will find at www.fluentusers.com assuming you have an id and a pwd.

January 9, 2005, 17:45

Thank you so much

uwsa · May 25, 2010, 04:57

Hi @all,

I am searching also for this Tutorial for nucleate subcooling. However I could not find it and I have also no access to the support.
Do you have this tutorial as a pdf file? May I have it in this case?

You would be a great help for me.

Thank you very much.

Best wishes

maroofi · October 6, 2010, 14:06

I need this tutorial too. One send it for me, please.
my email is r.maroofi@gmail.com

asaleghahreman · October 18, 2010, 19:32

hi all,
I want this tutorial too..
would u pls send it for me too??
tanks alot
my email is

asaleghahreman@yahoo.com

digvijay8911@gmail.com · June 27, 2011, 08:22

If anybody has Fluent Tutorial Heat and Mass transfer with mixture model and udf source.c Please email me My email id is digvijay8911@gmail.com

Thank you.

January 6, 2005, 14:24	Nucleate boiling using VOF	#1
Akash Guest Posts: n/a	Hello, I am trying to model Nucleate boiling using the VOF model available in Fluent. I would appreciate it if anybody could give some suggestions on how to define the interface between the vapor phase and the liquid phase.Thanks in advance. Akash

January 7, 2005, 17:13	Re: Nucleate boiling using VOF	#2
doctor dpm Guest Posts: n/a	there is a tutorial that you will find at www.fluentusers.com assuming you have an id and a pwd.

January 9, 2005, 17:45	Re: Nucleate boiling using VOF	#3
Akash Guest Posts: n/a	Thank you so much

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
UDF for Subcooled Nucleate Boiling	Jake	Fluent UDF and Scheme Programming	3	December 30, 2019 06:10
Tutorial for subcooled nucleate boiling	Asghari	FLUENT	42	December 10, 2018 12:42
nucleate boiling simulation in CFX	Anil	CFX	3	August 25, 2010 15:18
Nucleate boiling using CFD	santhosh	FLUENT	1	November 20, 2007 01:31
VOF vs BOILING	greg	FLUENT	0	April 1, 2007 11:59

May 25, 2010, 04:57		#4
uwsa New Member Erkan Join Date: May 2010 Posts: 9 Rep Power: 17	Hi @all, I am searching also for this Tutorial for nucleate subcooling. However I could not find it and I have also no access to the support. Do you have this tutorial as a pdf file? May I have it in this case? You would be a great help for me. Thank you very much. Best wishes

October 6, 2010, 14:06		#5
maroofi New Member Join Date: Oct 2010 Posts: 2 Rep Power: 0	I need this tutorial too. One send it for me, please. my email is r.maroofi@gmail.com

October 18, 2010, 19:32		#6
asaleghahreman New Member asal Join Date: Apr 2010 Posts: 11 Rep Power: 17	hi all, I want this tutorial too.. would u pls send it for me too?? tanks alot my email is asaleghahreman@yahoo.com

June 27, 2011, 08:22		#7
digvijay8911@gmail.com New Member digvijay Join Date: Feb 2011 Posts: 9 Rep Power: 16	If anybody has Fluent Tutorial Heat and Mass transfer with mixture model and udf source.c Please email me My email id is digvijay8911@gmail.com Thank you.