CFD Online Logo CFD Online URL
Home > Forums > FLUENT

3-Phase Modeling (Solid+water+air)

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   June 9, 2005, 02:12
Default 3-Phase Modeling (Solid+water+air)
Posts: n/a
In my problem a slurry(water+ dispersed solids) is entering from the inlet at the top of column. The air is entering from the bottom of column. The air and solid particles will collide. I am interested in collision efficeicy of these air buubles and solid particles. there are oulet for concenetrate at top and tails at bottom. i have problem in specifying the inlet condition of sluury as it is mixture of water and solids. i am using eulerian multiphase model.

If anybody can help me?

  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Free water jet impinging hot solid surface, including boiling hamdy Fluent UDF and Scheme Programming 5 August 19, 2012 19:52
Evaporatin water in the air Morteza FLUENT 1 August 20, 2008 05:04
Modeling of solid domains in fluent, no fluid flow Satish Perivilli FLUENT 2 December 1, 2005 12:41
Help!!!problems in air jet into water bath kim FLUENT 4 June 9, 2003 07:04
CFX4.3 -build analysis form Chie Min CFX 5 July 12, 2001 23:19

All times are GMT -4. The time now is 03:52.